Dongguan Solid Model Technology Co., Ltd Welcome!
You are here: Home » Products » Vehicles » ROCHOBBY 1:12 TYPE82 KUBELWAGEN


Remote: 118 x 73 x 145mm
Car: 317 x 135 x 129mm
Tire: D:58mm , W:12mm
Wheelbase Wheel Base : 202mm
Ground Clearance: 30mm
Approach Angle: 60°
Departure Angle: 40°
Mail order box: 377x 275 x 165MM
Outer carton: 565 x 387 x 355MM

Remote control: 131g (without battery)
Car: 635g (without battery)
Battery: 20g
Mail order box total weight: 1.49kg
Large outer box packaging total weight: 6.64kg

【Part01】11241Type barrel car manual in English and Chinese 1029_compressed (1).pdf

【Part02】11241Type barrel car manual in English and Chinese 1029_compressed.pdf


The FMS 1/12 Kubelwagen RC model was unveiled in the mid-term. With its spectacular design, it takes you back to the war-torn era.

The boxer's air-cooled horizontally opposed four-cylinder engine is the core of the car. The cylinders of the horizontally opposed engine are distributed on both sides. There is a 130 motor on the right cylinder and another 130 motor on the left. When applied to the Volkswagen T1 or Porsche 356 platform, it can output twice the power.

The engine crankshaft flywheel is connected by a belt and drives the generator and cooling fan at the same time. The semi-circular fan fairing is a major feature, where the airflow is distributed to the cylinders on both sides. Everything is restored on the model, which means you can observe the blade rotation through the fan inlet when the motor is running. Kübelwagen has 4 forward gears, their top speeds are respectively 1st gear 18.4km/h; 2nd gear 32.4km/h; 3rd gear 54.2km/h; 4th gear 83.6km/h. There is a corresponding red line shift prompt on the dashboard. On the model, a 2-speed shift was designed to simulate the speed of the first and third gears of a real car. The power passes through the top of the rear axle differential and then returns to the rear axle. This model has the same structure as the real engine and has the advantage of compactness, and can easily switch between 4WD and RWD modes. The shift function is perfectly reproduced on the model, providing more driving pleasure for off-road driving.

The door axle popular in today's climbing car market has been mass-produced barrel cars as early as 82 years ago. Lessons learned from the barrel car chassis, the minimum ground clearance reaches 310mm, which dwarfs all modern off-road vehicles on the market today.

The body, where the R&D team spends the most time, can see Bosch speakers and headlights, and Notek camouflage lights. Tires are the most common 5.25×16 in barrel trucks. Like the real car, the simulated wheels need to be fixed with 5 screws, and the front spare tire can be removed and installed. The rearview mirror is real instead of a sticker, and its angle is also adjustable.

1/12 human figures can vividly display a plot. With the increase of this series, users can gradually refine the plot. There are four clips in the middle of the armrests in front of the rear seats, which are stuck in the holes on the floor and can fix four 98K rifles.

The electronic system adopts a 4-channel digital proportional remote control system. In addition to the 1&2 channels used for steering and throttle control, the 3rd channel controls gear shifting, and the 4th channel switches between 4WD and RWD. There are also integrated light controls that allow you to turn on the headlights during normal night driving.


1. Four-wheel independent suspension

2. Rear door type axle

3. The front and rear axle planetary gear differentials

4. Perfectly restored air-cooled horizontally opposed four-cylinder engine

5. 130 motors in the cylinder

6. Belt drive cooling fan

7. Three-speed transmission control channel

8. Four-wheel drive-the fourth channel of rear drive mode switching

9. Telescopic windshield

10. Servo-driven synchronous steering wheel and front wheel

11. The real rearview mirror with adjustable angle

12. Including four openable doors and mechanical locks

13. Soft fabric seats and retractable rear seats

14. Spacious luggage compartment space and openable hatch

15. Openable engine compartment door

16.Excellent lighting function

17. Realistic 5.25-16 tires, wheels and spare tires

18. Front and rear metal bumpers

19. Suitable for 1/12 dolls

20. 30 stainless steel ball bearings

21. All metal gears

22. All metal drive shaft

23. The German Grey Plan of World War II

24. Exquisite pad printing body logo

25. Four-channel 2.4Ghz digital proportional remote control system

26. Receiver electronic governor two in one

27. 9G servo x 3pcs

rc cars china wholesalers,remote control car wholesale china,best rc car manufacturers,RC Car Wholesale Distributors






  +86-0769-86976655 ( Contact Person )
   Rooms 401-404, 501-504, 1001 and 1002, Building 6, Jicheng Science and Technology Innovation Park, Sanle East Road No.25, Shunjiang community, Beijiao Town, Shunde District, Foshan City, Guangdong Province
Dongguan Solid Model Technology Co., Ltd.
Copyright © 2007-2021  Dongguan Solid Model Technology Co., Ltd. All rights reserved.Technical Support: Molan Network